Pigment Red 170

Company/Product Information
Chemical /Family Name : Naphthol AS pigment
  C.I. Pigment Red 170: C. I. No. 12475
Primary Product use : Primary Product use:
Composition/Information on Ingredients
Material or Component CAS No. % Hazard Data
Pigment Red 170 2786-76-7 100  
Hazards Identification
Expected Route of Entry : Skin Contact, Eye Contact, Inhalation
Effect of Acute Exposure :
Eye:
Skin:
Inhalation:
May cause mild eye irritation
Prolonged or repeated contact may cause mild skin irritation.
May cause nausea.

First Aid Measures

Eye Contact:

In the case pigment comes into contact with eyes, it may cause irritation. In this flush eyes thoroughly with water for at least 15 minutes. If irritations persist, consult your physician.

Skin Contact:

In the case pigment comes into contact with skin, it may cause irritation. In this case wash skin with soap and water. Remove severely contaminated clothing and clean before reuse. Seek medical attention if irritation persist.

Inhalation:

In the case pigment is inhaled, it may cause respiratory irritation. In this case remove to fresh air. Get medical attention if necessary.

Ingestion:

In the case pigment is ingested it is not considered to be toxic. If swallowed, dilute with water and induce vomiting. Never give fluids or induce vomiting to an unconscious or person having convulsions. Contact medical help immediately in this case.

Fire Fighting Measures
Flammability Classification: Not Hazardous
Flash Point: Not Applicable
Flammable Limit in Air: Not Established
Auto ignition Temperature: Not Established
Extinguishing Media: Water, Foam, CO2, Dry Chemical
Special Fire Fighting Procedures: Exercise caution when fighting any chemical fire. Use NIOSHapproved self-contained breathing apparatus and full protective clothing.
May form explosive dust-air mixtures in the finely divided state. May form explosive dust-air mixtures in the finely divided state.

Accidental Release Measures

Step to be taken in case of spill:

Small spills may be flushed to the sewer. Large spills should be collected by shoveling into appropriate waste collection containers. Clean-up by flushing with water if desired. Utilized recommended clothing and equipment.

Handling and Storage

Handling:

Avoid dust formation. Keep away from ignition sources. Avoid breathing dust and contact with skin, eyes and clothing. Wash with water thoroughly after handling.

Storage:

Store in a cool, dry, well-ventilated area. Keep container sealed when not in use.

Exposure Control/Personal Protection
Respiration Protection: A NIOSH approved respirator as necessary.
Protective Equipment: Safety glasses (with side shields), Synthetic gloves.
Ventilation: Local exhaust ventilation recommended.
Exposure Guidelines: OSHA PEL/TWA: Not established; treat as nuisance dust:
15 mg/m3 (total dust); 5mg/m3 (respirable fraction)
Physical and Chemical Properties
Form: Powder
Color: Bright Bluish Red
pH: 6.5 – 7.5
Solubility in Water: Insoluble
Density: 1.28 g/cm3
Oil Absorption: 45 – 55 %
Physical and Chemical Properties
Stability: Stable
Incompatibility: Avoid strong oxidizing agents such as peroxides, chlorates, perchlorates, nitrates, and permanganates. Oxidizing materials may vigorously evolve oxygen, in large amounts. This product is a stable compound and hazardous polymerization will not occur.
Hazardous Decomposition Products: In case of fire pigments may evolve carbon monoxide and other toxic compounds.
Toxicological Information
Acute oral toxicity: LD 50 (rat): >5000 mg/kg
Acute inhalation toxicity: Not Available
Acute dermal toxicity: Not Available
Skin irritation: Not Available
Eye Irritation: Not Available

Ecological Information

Organic pigments, in general, are not expected to be toxic to fish because of their negligible water solubility thus they are not readily biodegradable. Specific eco-toxicological data is not available for this product

Disposal Considerations
RCRA Status: This product is not regulated as a toxic hazardous waste under 40CFR261
Waste Disposal Method: Disposal of this material must be made in accordance with Federal, State and Local regulations.
Transportation and Shipping Requirements
D.O.T Shipping Name (49 CFR 172.101-102): None
D.O.T Hazard Class (49 CFR 172.101-102): None
D.O.T Label: None

Regulatory Information

OSHA Hazard Communication Standard Status:

This product is not considered to be a hazardous substance under OSHA's Federal Hazard Communication Standard 29 CFR 1910.1200.

Toxic Substance Control Act (TSCA) Status:

All of the ingredients of this material have been reported to the U.S. EPA and are included in the TSCA chemical inventory.

Sara Title III

Section 302 (EHS):

Section 311/312 (Acute):

Section 313:

None

None

None

RCRA:

Not Regulate as a hazardous waste under RCRA.

CEPA (Canada):

All ingredients of this material have been listed on the Domestic Substance List (DSL).

EINECS (European Economic Community):

All components of this product are on the EINECS list.

California's Proposition 65 Regulated Substances:

None

Massachusetts Substance List:

None

CONEG:

This product is certified to be in full compliance with CONEG legislation for packaging and packaging ink components regarding hexavalent chromium, cadmium, lead, and mercury.

Ozone Depleting Substances (ODS):

This product neither contains nor is manufactured with an ozone depleting substance subject to the Labeling requirements of the Class Air Act Amendments 1990 and 40 CFR Part 82.

Other Information

None

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.